ISA 428 Pre Pack

Artikel

If you have the ADC card installed then you can connect via ADAT optical - connect from either of the ADAT outs on the 428 ADC to the ADAT IN on the 002. This format supports 8 channels of digital...
The 896HD has an ADAT IN port which you can connect one of the ADAT outs of the 428 to. This way all 8 channels of the 428 converter will be transmitted to the 896HD. Note that the 896HD only...
We have strived to make the ISA converters to the highest possible quality to preserve the detailed sound of the mic pres after conversion. The 428 converters are a very serious rival to any other...
If you have a digital card in your unit then check both analogue and digital outputs for noise. If you can hear the noise on all the analogue outputs as well as the digital outputs check that the...
When syncing to superclock the 'lock' LED does not actually light and should not be used as an indicator of lock. If you can get a clean digital audio signal out of the 428 and into Pro Tools when...
The pin out of the 9 pin D-sub connector on the A-D output card can be found here: ad9pinconfig.pdf